Eide Industries, Inc.


	Awnings • Tension Structures • Canopies • Canvas Products • Transporter Canopies • Eco Tents • Engineering • Graphics Applications • Industrial Sewing • Welding Fabricators • Worldwide Installation

• California Contractor #211771

• Nevada Contractor #68052 ($1 Mil. Limit)

• Nevada Contractor #68053 ($1 Mil. Limit)

• Arizona Contractor #133892

• Arizona Contractor #133893

• Los Angeles Type 1 Fabricator #1716

• NEW CSI Classification #107300, #107313,

#107316, #107323, #107326, #107343,

#133100, #133123, #133133 and #133423.

• Former CSI Classification #10530, #10536,

#10538, #02875, #13120 and #13130

What's New at Eide!
We are proud to announce that the Nevada State Contractors Board certifies that EIDE INDUSTRIES, INC. Is duly licensed as a Nevada Contractor in the following classifications: License No. 0068052 B5 - Prefabricated Steel Structures (Limit: $1,000,000.00) License No. 0068053 C14H - Awnings & Louvres (Limit: $1,000,000.00)

RECENT PROJECTS!

Buena Vista Projection Screens Eide fabricated two 50-ft. x 116-ft. Projection Screens for Buena Vista Pictures Distribution for the "Cars" movie release. Ferrari 502 Fabric were heat-sealed together on Eide's 12-meter (39.37-ft.) long Fiab machines. No.6 Spur Grommets were installed every 8-inches O.C. along the 2-inch wide web-hemmed perimeter.	click to enlarge

Saddle Ranch Chop House Tension Cover Eide Industries, Inc. completed the tension structure cover project for the Saddle Ranch Chop House restaurant and night club at the Universal City Walk in Universal City, California. The project covers 5,000 square feet and is supported by one 30” diameter galvanized steel mast which was extended 10 feet higher than the original canopy.	click to enlarge	click to enlarge

Envirotecture Tension Structures Eide Industries completed the fabrication and installation supervision of three unique hyperbolic tension structures for the MINX restaurant and night club in Glendale, California. The tension structure project was structurally engineered to a wind load of 70 MPH. The masts were fabricated with 14" steel tubes and 6" wide plates welded down four sides of the tubes for support, aesthetics and cable attachment functionality.	click to enlarge	click to enlarge

Home • Commercial Awnings • Canopies • Canvas Products • Cabanas • Tension Structures • Transporter Canopies • Eco Tent Housing • Engineering & Design

Graphic Applications • Installation Services • Gobos • Literature • Proposal Exclusions • Limits of Liability • Awnings (Mail Order Residential)

Eide Industries, Inc. / 16215 Piuma Avenue / Cerritos, CA 90703-1528 / Phone (562) 402-8335 / Fax (562) 924-2233 / Toll Free (800) 422-6827